Ricoh CH-C1 - RTB 172: FSM correction

Technical Bulletin PAGE: 1/1
Model: Ch-C1
Date: 2 -May-17
No.: RD135172
Subject: FSM correction –Minimum space requirements for the
machine–
Prepared by: A.Shigeta
From: 1st Tech Service Sec. MFP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Service Manual Correction
The minimum space requirements for the machine was corrected in the following section
of the Service Manual:
2. Installation > Minimum space Requirements > Installation Space
Installation space .
The following space is required for the user to use the machine. If you cannot secure this
space, then you will not be able to ensure the machine’s usability. Make this space to
avoid causing damage.
1 Rear
100mm (4")
2 Right
900mm (35.5") 150 mm (5.9”)
3 Front
400mm (15.7") 800 mm (31.5”)
4 Left
100mm (4") 150 mm (5.9”)
1
3
4
2