Ricoh CH-C1 - Page 533

Technical Bulletin PAGE: 12/12
Reissued: 1-Jun-15
Model: CH-C1 Office
Date: 22-Jul-14
No: RD135139a
5. First, match the screw hole in the spacer to the screw inserted in step 3
(indicated with the arrow) while you support the screw with your finger. Then,
match the screw hole on the other side and attach the spacer.
Make sure the two holes at the ends of the spacer and the tray match.
6 Put back the right tandem tray to complete the procedure.