Ricoh CH-C1 - Page 8

Technical Bulletin PAGE: 3/4
Reissued: 14-Jan-14
Model: CH-C1
Date: 20-May-13
No.: RD135015c
Version
Modified Points or Symptom Corrected
2.00.5:04
Specification Change:
Control for stopping the development unit motor was corrected.
Note:
This f/w does not have to be updated as a set with other software.
IMPORTANT note for the MP C8002/ProC5110S only:
If updating the firmware from a version 2.00.2:04 or earlier, make sure to set
all the SP modes listed in the table to the values shown.
If you do not, the rear side of the paper may become dirtied when feeding
Thin Paper, Plain Paper 1, or Plain Paper 2.
Note: This procedure is NOT required for the MP C6502/Pro C5100S.
SP#
Default Value
MP C8002
Pro C5110S
SP1-022-001
-2
-5
-5
SP1-022-002
-2
-5
-5
SP1-022-003
-2
-5
-5
SP1-022-004
-2
-2
-5
SP1-022-005
-2
-2
-5
SP1-022-012
-2
-5
-5
SP1-022-013
-2
-5
-5
SP1-022-014
-2
-2
-5
SP1-022-015
-2
-2
-5
SP1-022-022
-2
-5
-5
SP1-022-023
-2
-5
-5
SP1-022-024
-2
-2
-5
SP1-022-025
-2
-2
-5