Technical Bulletin PAGE: 1/2
Can the customer accept
reduced CPM mode?
Set SP1-113-001 to -028 (depending
on the paper used) to “1”.
Set SP1-113-061 to -088
(depending on the paper used) to
(Current value) - 20
Print out some samples and check
if the paper curl is resolved.
Is the image quality normal?
Set SP1-113-031 to -053 (depending
on the paper used) to “5”,
Print out 50 pages of A4 (LEF)
sheets.
Print out some samples and check
if the paper curl is resolved.
Is the image quality normal?
Does fusing offset occur?
Is the humidity more than
65%? (check SP3-261-002).
Set SP 1-113-150 as follows:
(Value of SP 3-261-002) - 10
Set SP1-984-001 to -254
(depending on the paper used)
to (Current value) - 5
Print out 50 pages of A4 (LEF)
sheets.
Does fusing offset occur?
Print out some samples and check
if the paper curl is resolved.