Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on
the exposure glass and place the envelope in the bypass tray, paper trays, or the wide LCT.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
About handling envelopes, supported envelope types, and how to load envelopes, see Paper
Specifications and Adding Paper for details.
• The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1
sided 2 sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal
and vertical length of the envelope.
: Horizontal
: Vertical
Be sure to include the fully open flap in the horizontal dimension.
When using the standard operation panel
For details about how to use this function, see page 112 "Procedure for Copying onto Envelopes
from the Bypass Tray (Classic)".
When using the Smart Operation Panel
You can use this function from the Copy Application and Copier (Classic) Application.
Copying onto Envelopes
111
To Next Page
Loading...
Need help?
General
