3. Copy
This chapter describes the basic procedure for making copies.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
About placing the original on the exposure glass, see Paper Specifications and Adding Paper for
details.
About placing the original in the ADF, see Paper Specifications and Adding Paper for details.
To copy onto paper other than plain paper, specify the paper type in [Tray Paper Settings] according to
the weight of the paper you are using. For details, see "Changing Tray Paper Settings", Paper Settings.
When using the standard operation panel
For details about how to use this function, see page 93 "Basic Procedure (Classic)".
When using the Smart Operation Panel
You can use this function from the Copy Application and Copier (Classic) Application.
When Using the Copy Application
About how to use the application's screen, see page 65 "[Copy] Screen (When Using the Smart
Operation Panel)".
When Using the Copier (Classic) Application
For details about how to use the Classic Copier function, see page 93 "Basic Procedure
(Classic)".
Basic Procedure (Classic)
1. Display the initial copy screen.
• When using the standard operation panel
1. Press the [Home] key on the control panel.
93
To Next Page
Loading...
