Ricoh Pro C5200s User Manual

Loading Paper into the A3/11 × 17 Tray Unit
(mainly Europe)
A3/11 × 17 tray unit can hold A3 paper only. If you want to print on A4 , B4 JIS , 11 × 17 ,
8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
(mainly North America)
A3/11 × 17 tray unit can hold 11 × 17 paper only. If you want to print on A3 , A4 , B4 JIS ,
8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
• Check that the paper edges are aligned at the right side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
CVA004
2. Square the paper and load it print side down.
Do not stack paper over the limit mark.
CVA005
3. Carefully push the paper tray fully in.
Loading Paper
167

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes