Ricoh Pro C5200s User Manual

When You Have Problems Operating the
Machine
Problem Cause Solution
When the machine is turned
on, the only icon that
appears on the home screen
is the copier function icon.
Functions other than the
copier function are not yet
ready.
Wait a little longer.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions
appear in the User Tools
menu when they become
ready for use.
Wait a little longer.
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though the [Energy Saver]
key was pressed.
In some cases, the machine
does not enter Sleep mode
when the [Energy Saver] key
is pressed.
Before you press the [Energy Saver]
key, check that Sleep mode can be
enabled. For details about enabling
Sleep mode, see "Saving Energy",
Getting Started.
The display is turned off. The machine is in Low Power
mode.
When using the standard operation
panel
Touch the display panel or press one
of the keys on the control panel to
cancel Low Power mode.
When using the Smart Operation Panel
Touch the display panel.
The display is turned off. The machine is in Sleep
mode.
When using the standard operation
panel
Press the [Energy Saver] key or the
[Check Status] key to exit Sleep mode.
When using the Smart Operation Panel
Touch the display panel.
When You Have Problems Operating the Machine
231

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes