5. Scan
This chapter describes frequently used scanner functions and operations. For information not included in
this chapter, see Scan available on our website.
Basic Procedure When Using Scan to Folder
• Before performing this procedure, see "Preparation for Sending by Scan to Folder", Scan, and
confirm the details of the destination computer. See also "Registering Folders", Connecting the
Machine/ System Settings, and register the address of the destination computer to the address
book.
When using the standard operation panel
For details about how to use this function, see page 133 "Basic Procedure When Using Scan to
Folder (Classic)".
When using the Smart Operation Panel
You can use this function from the Scanner Application and Scanner (Classic) Application.
When Using the Scanner Application
About how to use the application's screen, see page 67 "[Scanner] Screen (When Using the Smart
Operation Panel)".
When Using the Scanner (Classic) Application
For details about how to use the Classic Scanner function, see page 133 "Basic Procedure When
Using Scan to Folder (Classic)".
Basic Procedure When Using Scan to Folder (Classic)
1. Display the initial scanner screen.
• When using the standard operation panel
1. Press the [Home] key on the control panel.
133
To Next Page
Loading...
Need help?
General
