Registering Functions in a Program (When
Using the Standard Operation Panel)
The number of programs that can be registered is as follows:
• Copier: 25 programs
• Document Server: 25 programs
• Scanner: 25 programs
The following settings can be registered to programs:
Copier:
Color mode, original type, density, Original Settings, paper tray, Store File (except for User
Name, File Name, and Password), Auto Reduce / Enlarge, Create Margin, ID Card Copy,
Finishing, Cover/Slip Sheet, Edit / Color, Dup./Combine/Series, Reduce / Enlarge, number of
copies
Document Server (on the initial document print screen):
Finishing, Cover/Slip Sheet (except for Main Sheets in Designate / Chapter), Edit / Stamp, 2
Sided / Book, number of prints
Scanner:
Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings
and Start No.), Store File (except for User Name, File Name, and Password), Preview,
Destinations selected from the Address Book, Text, Subject, Security, Recept. Notice, File Emailing
Method
This section explains how to register functions in a program using copier function as an example.
1. Press the [Home] key on the bottom left of the control panel, and press the [Copier] icon
on the [Home] screen.
If the [Copier] icon does not appear, press the
icon at the upper right corner of the screen to
switch to the menu screen.
2. Edit the copy settings so all functions you want to store in a program are selected.
Registering Functions in a Program (When Using the Standard Operation Panel)
73
To Next Page
Loading...
Need help?
General
