EasyManuals Logo

Ricoh Pro C5200s User Manual

Ricoh Pro C5200s
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Turning On/Off the Power
When you push the main power switch, wait at least 10 seconds after it is confirmed that the main
power indicator has lit up or gone out.
The main power switch is on the left side of the machine. When this switch is turned on, the main power
turns on and the main power indicator on the right side of the control panel lights up. When this switch is
turned off, the main power turns off and the main power indicator goes out. When this is done, machine
power is off. Use this switch only when necessary.
Confirm how much power the options draw, and then plug them into an outlet that is nearby but
separate from the outlet that the main machine is plugged into.
Turning On the Main Power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the main power switch cover, and push the main power switch.
The main power indicator goes on.
DRC126
Turning Off the Main Power
When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
Do not turn off the power while the machine is in operation.
Turning On/Off the Power
85

Table of Contents

Other manuals for Ricoh Pro C5200s

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Pro C5200s and is the answer not in the manual?

Ricoh Pro C5200s Specifications

General IconGeneral
Print TechnologyLaser
Max Paper Size330.2 x 487.7 mm
Monthly Duty Cycle300, 000 pages
Print Speed65 ppm
Resolution1200 x 4800 dpi
Paper Input Capacity8, 250 sheets
Paper Weight52 to 360 gsm
Duplex PrintingStandard
Network ConnectivityEthernet 10Base-T/100Base-TX/1000Base-T
Supported Media SizesA3, A4, A5, B4, B5
Supported Media TypesPlain, Recycled, Coated, Envelope
Warm-up TimeLess than 5 minutes

Related product manuals