Ricoh Pro C5200s User Manual

Sort
The machine assembles copies as sets in sequential order.
Depending on your model and which options are installed on it, some of these functions might not be
available. For details, see "Functions Requiring Optional Configurations", Getting Started.
• You cannot use the bypass tray with Rotate Sort.
Sort/Shift Sort
Copies are assembled as sets in sequential order.
To use Shift Sort, a finisher is required. Each time the copies of one set or a job are delivered, the
next copy is shifted to separate each set or job.
CKN018
Rotate Sort
Every other copy set is rotated by 90 degrees ( ) and delivered to the copy tray.
CKN019
To use the Rotate Sort function, two paper trays loaded with paper of the same size and type, but in
different orientation ( ), are required.
For details, see "Changing Tray Paper Settings", Paper Settings.
When using the standard operation panel
For details about how to use this function, see page 115 "Procedure for Sort (Classic)".
When using the Smart Operation Panel
You can use this function from the Copy Application and Copier (Classic) Application.
3. Copy
114

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes