Ricoh Pro C5200s User Manual

1. Carefully pull out the paper tray until it stops.
DRC155
2. Square the paper and load it print side down.
Do not stack paper over the limit mark.
• Whole tray pulled out
DRC156
• Left half of the tray pulled out
DRC157
3. Carefully push the paper tray fully in.
• You can load paper even if Tray 1 is in use. It is okay to pull out the left half of the tray while Tray 1
is in use.
8. Adding Paper and Toner
166

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes