5.7.2.2 Time delayed message for input ON
If there is an input signal, the respective message transmission can be time delayed, i.e. the SMS relay only
sends the pre-defined message after the preset time has elapsed and if the signal has remained ON
constantly during that time. In other words, the input signal is ignored during the set delay time. Time delays
of 0.1 seconds to 99.9 hours are possible. This time function default must be activated and is to prevent
unstable triggers producing numerous SMS messages.
REMARK
It is recommended to use the delay function to avoid several messages being sent for the same
event.
To Next Page
Loading...
