Rievtech x-Messenger Series - How to Change the Register Value(F,Q,AQ,AF,REG) or Phonebook Via SMS

28
1. Set the email address of the receivers, there are 3 receiver E-mail addresses can be set.
2. E-mail caption configuration box.
3. Email contents can be text message and parameters message
Text message can be edit in the message editor( 4 in the above figure)
Parameters message including such as IO status, analog IO values, kinds of parameters(counters, timers,
RTC etc).
3.3.1.3 How to change the register value(F,Q,AQ,AF,REG) or phonebook via SMS
Send an SMS message formatted like the example below
##**