Actual Demonstration:
① Dial the telephone No. 1234567 of the voice module from user1--4..
② It will play Message 1 “Please enter the password.”
③ Enter the preset password via the telephone keys.
A. Correct password.
It will play Message 2 “Correct password.” If I1 is not triggered, it will play
Message 4 “Run normally. No alarm.” After playing, if user doesn’t hang up the
telephone, it will play Message 4 repeatedly.
B. Wrong password.
It will play Message 3 “Wrong password. Please re-enter.” and then Message 1
“Please enter the password.”
Example 2
x-Messenger system detects there is something abnormal and prompt the user. Under this situation, the
x-Messenger is needed to set password to avoid the stranger knowing the prompting contents. Password
can be set via the panel key or via the menu in eSmsConfig software.
Program is as follows:
To Next Page
Loading...
