Display CPU model.
Firmware Ver:
Display Firmware Version.
Hardware Ver:
Display Hardware Version.
GPRS connection: (For EXM series CPU)
Display “connected” or “Not connected”.
GSM signal:(For EXM series CPU)
Display GSM signal.
Variable Configure
“Variable config” interface
You can click on “Add Variable” to add variable. And you can change or delete the variable as well.
Up to 16 variables can be configured
Name:
You can define a name for variable.(8 characters can be input)
Item:
You can configure 13 kinds of variables.(These variables are in the xlogicsoft)
To Next Page
Loading...
