Rohde & Schwarz GP-E - Page 127

User Interface
R&S
®
GP-E/GP-S
127User Manual v16.2.1 ─ 01
In the expanded view, the columns of both tables display the "Common Name, Organi-
zation" of the CA certificate, its validity information ( "Start Date" and "Expiration
Date" ) and its trust setting (whether the CA is "Trusted" or not). The buttons in the last
column allow you to view and adjust the settings for an existing truststore certificate or
delete a custom certificate from the system.
For further information, see Chapter 3.2, "Icons and Buttons", on page 21.
To send a custom CA to gateprotect Firewall and to activate its trust setting, click the
(Import) button in the item list header, select and open the desired PEM or DER file
and upload it. The imported custom certificate is added to the list of available custom
certificates.
Click "
Activate" in the toolbar at the top of the desktop to apply your configuration
changes.
Editing the Trust Settings
You can change the trust settings of any certificate authority.
1. Navigate to "Cert. Management > Truststore > Custom Certificates" or "Cert. Man-
agement > Truststore > System Certificates" .
2. Search the item list bar for the CA for which you would like to change the trust set-
tings.
3.
Click the
(Edit) button behind the CA you would like to change the trust settings
for.
4. The editor panel that opens displays a green (if trusted) or orange (if mistrusted)
bar and all the non-editable attributes of the CA.
5. Click the green bar to mistrust, the orange bar to trust the CA.
6. Click "Save" to store the reconfigured CA.
7. Repeat steps 2 to 6 for every other CA for which you would like to change the trust
settings.
8.
Click "
Activate" in the toolbar at the top of the desktop to apply your configura-
tion changes.
Menu Reference