User Interface
R&S
®
GP-E/GP-S
53User Manual v16.2.1 ─ 01
– Optional: The "Group Object Class"
– Optional: The "Group Member Selector"
> Access to LDAP Server
The settings in this section determine whether gateprotect Firewall connects to the
server anonymously or logs in using a specified user account to access the necessary
entries in the directory. By default, Anonymous is pre-selected from the drop-down list.
> Directory
The "Directory" settings allow you to specify the directory structure.
●
Under "Search Base DN" , enter a distinguished name as a sequence of relative
distinguished names (RDN) separated by commas, such as three domainCompo-
nents: dc=ldap,dc=example,dc=com, to define the location within the directory
from where the directory search should start.
●
The "LDAP Scope" setting determines the depth of the directory search:
– The default SUBTREE setting searches all entries under the defined search
base (including the search base).
– The ONELEVEL option limits the search to the entries located immediately
below the defined search base.
– The BASE setting verifies the existence of the specified search base.
The buttons at the bottom right of the editor panel allow you to shut ( "Close" ) the edi-
tor panel as long as no changes have been made and to store ( "Save" ) or to discard
( "Reset" ) your changes.
Click "
Activate" in the toolbar at the top of the desktop to apply your configuration
changes.
3.4.1.9 License
The exact feature set of each gateprotect Firewall depends on the license acquired
from Rohde & Schwarz Cybersecurity.
Without any license purchased, the system operates on a minimal feature set, only
allowing for a license to be downloaded or uploaded by the administrator.
The following features can be included in a license:
●
Custom Decoder
●
DynDNS
●
Forensic Traffic Capture
●
High Availability
●
Mail Proxy
●
Multi WAN
●
WLAN (Wi-Fi)
Menu Reference
To Next Page
Loading...