User Interface
R&S
®
GP-E/GP-S
103User Manual v16.2.1 ─ 01
The buttons at the bottom right of the editor panel depend on whether you add a new
web filter profile or edit an existing profile. For a newly configured profile, click "Create"
to add the profile to the list of available web filter profiles or "Cancel" to discard your
changes. To edit an existing profile, click "Save" to store the reconfigured profile or
"Reset" to discard your changes. You can click "Close" to shut the editor panel as long
as no changes have been made on it.
Click "
Activate" in the toolbar of the desktop to apply your configuration changes if
the edited web filter profile is already associated with a firewall rule.
The web filter profiles defined here are available for use in custom firewall rules as
described under Chapter 3.3, "Firewall Rule Settings", on page 22. They will only take
effect, though, after you have installed the web filter license module update. For further
information, see Chapter 3.4.1.3, "Updates", on page 33.
3.4.6.4 Antispam Settings
gateprotect Firewall can protect your system from email spam.
Under "UTM > Antispam" , you can configure your gateprotect Firewall to prevent email
spam.
The "Antispam" settings allow you to configure the following elements:
Field Description
"On" / "Off" A slider switch indicates whether antispam is active ( "On" ) or inactive ( "Off" ).
By clicking the slider switch, you can toggle the state of this service. This option
is activated by default.
"Spam Detection" Select one of the following options by clicking the appropriate button:
●
"Confirmed" – Emails containing known and verified spam patterns are
classified as spam.
●
"Bulk" – Additionally to Confirmed, emails from accounts known to send
bulk emails (mass mailing) are classified as spam.
●
"Suspect" – Additionally to Confirmed and Bulk, emails from accounts
sending suspicious amounts of emails are classified as spam (default set-
ting).
"Spam Tag" Specify how spam is tagged by selecting one of the following options:
●
"Header" – The original email is marked as spam in the header (default
setting).
●
"Subject" – The original email is marked as spam in the header and the
subject is changed according to the subject formatting.
●
"Attachment" – An email detected as spam is attached to a new email that
is marked as spam both in the subject (according to the subject formatting)
and in the header.
Menu Reference
To Next Page
Loading...