User Interface
R&S
®
GP-E/GP-S
30User Manual v16.2.1 ─ 01
the interfaces that are assigned to the zones, their link status, transmitted and
received bytes and the data throughput for every zone.
●
In the "Services" section you can see whether the services DHCP, DNS, Firewall,
High Availability, NTP, and Updater are running on the system.
●
The "Maintenance" section gives an overview of basic system settings:
– "Backup Schedule" indicates whether backups are enabled or not
– "Updates" shows whether updates are pending or not (the tooltip shows how
many updates are pending)
– "High Availability" indicates whether High Availability is enabled or not
– "Uptime" displays for how long the system has been running since the last
reboot
– "Machine ID" states the Machine ID of your device
– "Hardware" informs you about the hardware version of your device
– "Version" indicates which software version is running on the system
– "Timezone" shows which time zone is configured on the system (click the blue
link to navigate directly to "Settings" to view the corresponding configuration
options)
3.4.1.2 Reports
The "Reports" display detailed information about the traffic flowing through the gatepro-
tect Firewall. Each report includes a chart and a table with statistics for a certain time
range. You can control several aspects of the presentation and data on these reports.
Navigate to "Firewall > Reports" to display the list of reports, subdivided into aggrega-
tion intervals (last hour, day, week, and month), that are available on the system in the
item list bar. To view a report, click the desired report in the item list bar and the report
panel opens.
Click "Close" to leave the report view.
Working with Reports
The charts and tables in the "Reports" panels share common functions to adjust the
data display and allow you to focus on the data you are most interested in.
Menu Reference
To Next Page
Loading...