Rohde & Schwarz GP-E - Firewall; Menu Reference; Status

User Interface
R&S
®
GP-E/GP-S
29User Manual v16.2.1 ─ 01
Checkbox Description
"dollar end only" Make the $ anchor match only at the end of the string (or end of line if multi-line
mode is enabled).
"caseless" Ignore case: pattern is treated as case insensitive.
"dot all" The dot (period) character class matches any character except newline by
default. Select this option to match newlines.
"anchored" Matches at the start of the search string.
"ungreedy" »Lazy« mode (reverses quantifiers): The regular quantifier * will cause matches
to be as small as possible and quantifiers followed by a ? will cause matches to
be as large as possible.
"multiline" Multiple-line matching: The ^ and $ anchors match at newlines.
"extended" Free spacing mode (?x): Ignore white space in the remainder of the pattern or
subpattern.
See Chapter 4.13, "Decoder Examples", on page 201 for sample decoder configura-
tions that can be used to detect various types of content. For a list of supported FTP
commands and HTTP mime types, see Chapter A, "Decoder Reference",
on page 209.
3.4 Menu Reference
This reference section describes each menu item in the navigation pane on the left
side of the browser window.
Refer to the topics below for information on the options available.
3.4.1 Firewall
The " Firewall" settings display an overview of basic system settings and detailed
information about the traffic flowing through gateprotect Firewall and allow you to con-
figure gateprotect Firewall for your local environment.
3.4.1.1 Status
The "Firewall Status" displays an overview of basic system settings, the status of each
of the assigned interfaces on the local network, and information on the services that
are running on the system.
Navigate to "Firewall > Status" to display the overview.
In the expanded view, the columns of the table display the following information in
each section:
●
The "Physical Interfaces" section displays basic information about the configured
zones and their physical interfaces. The columns of the table display the "Name" of
Menu Reference