User Interface
R&S
®
GP-E/GP-S
74User Manual v16.2.1 ─ 01
Field Description
"Dynamic DHCP Scope" To supply clients with addresses, a range of IP addresses can be assigned to
the server using these settings. You can use the default DHCP address range,
or enter a different beginning and end of the range of addresses that you want
to distribute to computers in this zone. A dynamic DHCP scope provides each
client with the next available address in the range.
Note: If you edit the DHCP scope, a check mark appears on the right of the
input fields. You have to click the check mark before being able to save the set-
tings of the WLAN zone.
"Static IP Addresses" A static DHCP scope provides specific IP addresses to specific computers on
your network. When a host connects with the specified hostname or MAC
address, it receives the designated IP address.
If you configure an IP address from within the dynamic DHCP address range as a
static IP address, this IP address will not be dynamically assigned by the DHCP server
to a client other than the one specified any more.
On the "Web Admin Access" tab:
Field Description
"Web Admin Access" Select the checkbox to enable HTTP(S) access to the web admin frontend.
"HTTPS" This option determines whether an encrypted connection is used to access the
gateprotect Firewall web interface. The option is set to "Off" by default but you
can turn it "On" or use the "Force" setting.
Note: When "HTTPS" is set to "Force" , subsequent requests from your
browser to the web interface must be preceded by https:// or you will be
unable to connect.
"Certificate" From the drop-down list, select a webserver certificate to be used for the
HTTPS connection.
"Certificate Password" Enter the corresponding password for the certificate.
"Show Password" Optional: Select the checkbox to verify the password.
On the "WLAN" tab:
Field Description
"Mode" Select the communication specifications according to IEEE 802.11 from the
drop-down list. The mode can be one of the following:
●
a – up to 54 Mbit/s 5 GHz
●
an – up to 300 Mbit/s 5 GHz
●
b – up to 11 Mbit/s 2.4 GHz
●
g – up to 54 Mibt/s 2.4 GHz
●
gn – up to 300 Mbit/s 2.4 GHz
"Country Code" Select the correct country code for your country (for example DE for Germany).
Note: This may affect the permissible maximum "Transmit Power" .
"SSID" Enter an identifier for the wireless local area network. The set default value is
gateprotect.
"SSID Visible" Select this checkbox if you want the SSID to be visible.
Menu Reference
To Next Page
Loading...