EasyManua.ls Logo

Rohde ST 310 - 2.2. Technical Information; 2.3. Wireless Network;Wi-Fi Specifications

Rohde ST 310
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47 / 293 - EN -
2.2. Technical information
Information Description
Protection class
2
Degree of pollution
2
IP rating
IP50
Supply
100240 V, AC, 5060 Hz, 1.0 A
Fuse
Micro-fuse, 0.5 A, 5 mm x 20 mm, slow-blow, ceramic
ROHDE item no. 704850
Ambient temperature
-5 °C to +30 °C
Weight (kg)
0.5 kg
Housing dimensions
Width 80/68 mm x height 165 mm x depth 28 mm
Housing material
Plastic, ABS, flame-retardant, UL 94V-0
Holder material
Plastic, ABS, flame-retardant, UL 94V-0
Connection cable
Length 2 m, insulation PU, CPC 14 connector
Thermocouple
Type S (factory standard)
2.3. Wireless network/Wi-Fi specifications to connect to the controller
Wireless network / Wi-Fi | Specifications
Supported frequency
2.4 GHz
Supported standards
802.11b / 802.11g / 802.11n (at 2.4 GHz)
Supported security protocols
WEP / WPA / WPA2
Bit rate
Up to 150 Mbps (at 802.11n and 2.4 GHz)
Integrated single antenna
Yes
Unsupported security protocols
OpenWiFi / WPA2 Enterprise
Points to note when accessing the wireless
network/Wi-Fi:
Unable to establish connections when:
an “acceptance page” (confirmation of
connection/terms of use) must be clicked after
establishing the connection,
or a username and password are required to
establish the connection.

Table of Contents

Related product manuals