Rohde ST 310 - ROHDE myKiln App; 8.2.1. General Information

72 / 293 - EN -
Step Description Remark
19
The controller indicates an existing connection to the wireless network
(Wi-Fi) by a sporadic flashing of the “Data transmission” indicator near the
main display.
20
Check the connection with the wireless network (Wi-Fi) by calling up the
ROHDE myKiln app with a smartphone, tablet or computer. If not already
done, connect your controller to the app using the controller’s access
code (see Section 8.2.2). If you now start a firing with the controller, you
should see this in the app or be able to send firing programs from the app
to the controller.
8.2. ROHDE myKiln app
8.2.1. General information
ROHDE myKiln is an app for visualising and archiving firing curves from the recorded measured values of the control
system and for creating, editing or managing firing programs.
Create an
account
N
Create a free account and register the controller there with the
access code.
Connect to the
Wi-Fi
7 p
Connect the controller and the smartphone, tablet or computer to
the wireless network (Wi-Fi).
Record data
7
The controller automatically records the firing data in the ROHDE
myKiln app during firing.
Monitoring and
evaluating
X
The firing data is displayed and saved as a firing curve in the
ROHDE myKiln app.
Send program
data
G
Create, edit or manage firing program data from firing programs and
load them onto the controller with the ROHDE myKiln app.
System
requirements
Z
You need an Internet-enabled device (smartphone, tablet or
computer), and to connect the controller to the Internet, you need
a wireless access point.
You can create a free account and read FAQs at:
app.rohde.eu (web) myKiln in the Play Store (Android) myKiln in the App Store (Apple)