82 / 293 - EN -
14. Declaration of Conformity
We declare that the relevant and basic requirements of the Low Voltage Directive 2014/35/EU have been met.
Manufacturer: Helmut ROHDE GmbH
Ried 9
83134 Prutting
Germany
Community resident authorised
to compile the relevant technical
documents: Helmut ROHDE GmbH
Stefan Meier
Ried 9
83134 Prutting
Germany
The manufacturer of the product described below bears sole responsibility for issuing this declaration of conformity.
Description and identification
Product: Control unit
Model: ST 310
Purpose: Kiln control
The following harmonised standards were used, among others:
EN 60730-1:2021-06 Automatic electrical controls,
Part 1: General requirements
EN 60335-1:2012-10 Household and similar electrical appliances, Safety,
Part 1: General requirements
We also declare that the special technical documents have been created. The technical documentation can be sent
to a national authority following a justified request.
Prutting, August 29th, 2023 Benjamin Rohde (General Manager)
(Place and date) (Signature)
To Next Page
Loading...
