Rohde ST 310 - Parameter Configuration; 10.1. General Description; 10.2. Available Parameters

79 / 293 - EN -
Step Action Remark
8
Reinstall the fuse and carrier in reverse order. Tool:
7 mm slotted screwdriver
9
Reconnect the connection cable of the control system
to the kiln.
10
Turn on the kiln.
Set the main switch on the kiln to the
“I/ON” position and/or plug in the power
plug.
11
Turn on the control unit.
12
Check the control system works.
If the control unit still cannot be switched
on, contact a qualified electrician, the local
specialist or the manufacturer.
10. Parameter configuration
10.1. General description
By changing the available parameters, the controller can be adapted to your individual requirements.
10.2. Available parameters
Parameter
Number
Function
Min.
value
Max.
Value
Default
setting
Description of the value
14
Kiln output in kW 0 9999 0
1 unit = 0.1 kW
E.g.:
For a kiln with 10 kW power
(see kiln nameplate), enter the
value “100” here.
50
Logging interval data
on USB in s
5 300 60 1 unit = 1 s (second)
60
Temperature display in
°C or °F
0 1 0
0 =°C
1 = °F