MASTER STC
USER MANUAL
13
7 THE ENCODER – STANDARD NAVIGATION MODE
Navigate into the various functions and menus of the MASTER STC is quick and easy. A
multi-function continuous encoder
[D] allows the user to surf all the meter
functions, easily selecting the required function and quickly setting the desired values, by
simply rotating and pressing the encoder itself. Thanks to the ergonomic design of the
encoder knob just one hand is required.
When an item in the LCD [C] is black-highlighted, rotating the encoder [D] one step
clockwise will highlight the next item; rotating the encoder [D] one step counter-clockwise will
highlight the previous item.
Once black-highlighted the desired item, press and release the encoder knob, and the black
highlight will start blinking. When the black highlight is blinking, rotating the encoder [D] one
step clockwise will raise the value of the selected (highlighted) item; rotating the encoder [D]
one step counter-clockwise will decrease the value of the selected (highlighted) item. Once
set the appropriate value, just press and release the encoder knob, and the black highlight
will stop blinking, allowing you to move to a different item by simply rotating the encoder
knob.
These features will from now on be referred to as “Standard Navigation Mode”
To Next Page
Loading...
Need help?
General