MASTER STC
USER MANUAL
23
FM /FM RADIO SIGNALS TUNING [87,5 – 108 MHz]
When in the main Audio peak level measurement screen, using the Standard navigation
Mode, highlight the tuned signal type (TV ANALOG / TV COFDM DVB-T/H).
Using the encoder [D], select the item FM RADIO.
On the right handside of the F icon the tuned frequency is displayed, and the received
audio signal can be listened through the meter built-in loudspeaker.
Change the frequency value using the Standard Navigation Mode, or proceed as
described at page 21 DIRECT FREQUENCY INPUT
To Next Page
Loading...