MASTER STC
USER MANUAL
59
The LCD first row displays (left to right) the selected Transponder Memory Plan, the
transponder currently in use, the relevant frequency value.
SELECT THE REQUIRED TRANSPONDER
Highlight the currently tuned transponder and select the required transponder. Each
encoder step selects the previous or the next transponder. To speed up the surfing, rotate
the encoder quickly.
ONLY A TRANSPONDER INCLUDED IN THE SELECTED TRANSPONDER MEMORY
PLAN CAN BE SELECTED.
MANUALLY MODIFY THE FREQUENCY VALUE
Should you need to manually modify the frequency value, highlight the current frequency
value item. Each encoder step increase or decrease the frequency value by 0,1 MHz. To
speed up the surfing, rotate the encoder quickly.
MODIFY THE TRANSPONDERS GROUP TO BE EXPLORED
The transponders group can be modified only from the main screen. Press once and
release the PLAN [1] key and select the item MANUAL MEMORY to enter the main screen.
WARNING: After showing the user defined Transponder Memory Plans, the meter
will display the pre-stored groups of transponder (refer to Chapter 18.1 EXPLORING
ALL THE TRANSPONDERS OF A SATELLITE at page 56)
To Next Page
Loading...
Need help?
General