MASTER STC
USER MANUAL
67
21 SATELLITE AUTO MEAS&STORE (DATA LOGGER)
This meter can automatically tune all of the transponder of a specific satellite, or included in
any Transponder Memory Plan (whichever the type), and to automatically perform all the
available measurements on each of the tuned transponders. The measurements results are
stored into a user selected target file (LOGGER files).
Any LOGGER file can be downloaded to a PC in MS Excel ® format using the connection
software ROVER SMART ®.
The meter is capable to store up to 99 different LOGGER files, thus allowing the user to
perform a complete auto Meas&Store at almost every end-user socket in a building, and to
archive the results only when back home, without any need to stop the field activity to free
memory space for allowing further measurements.
21.1 AUTO MEAS&STORE
Refer to the Chapter 16.1 AUTO MEAS&STORE at page 50
21.2 RECALL A PREVIOUSLY STORED LOGGER MEMORY PLAN
Refer to the Chapter RECALL A PREVIOUSLY STORED LOGGER MEMORY PLAN at
page 51.
21.3 DELETING A MEMORY PLAN
Refer to Chapter 22.3 DELETING A MEMORY PLAN at page 69 to delete the useless files.
To Next Page
Loading...
Need help?
General