MASTER STC
USER MANUAL
49
• Using the Standard navigation Mode, highlight SELECT FILE and select the memory
plan to be deleted (AUTO 1, AUTO 2, …).
• Highlight the item DELETE FILE and press the encoder knob [D] to permanently
delete the above selected memory plan.
The meter will confirm the selected plan has been deleted (DELETED!). The warning
message VOIDED! means you have tried to delete a permanent and not erasable
memory plan (e.g.: ITALY).
DELETING A MANUAL MEMORY CHANNEL PLAN
Using the Standard navigation Mode, highlight the item SELECT TYPE, then select the
item PLAN.
• Highlight the item SELECT FILE and select the memory plan to be deleted (MANU1,
MANU2, …).
• Highlight the item DELETE FILE and press the encoder knob [D] to permanently
delete the above selected memory plan.
The meter will confirm the selected plan has been deleted (DELETED!). The warning
message VOIDED! means you have tried to delete a permanent and not erasable
memory plan (e.g.: ITALY).
To Next Page
Loading...