Opening the Drawer When There is no Power
Partial Reset
I f the cash register did not respond to the H alf System C lear, try a Partial
R eset. T his procedure requires both your hands or a friend to help.
To do a partial reset
1 U nplug the cash register from the power source.
2 Using the round N umber keys, press and hold the 3 key and the 7 key at
the same time. C ontinue to hold these keys down.
3 W hile you are still holding down the 3 and 7 keys, plug the cash register
back into the power source.
4 R elease the 3 and 7 keys.
5 C ontinue with normal operations.
Opening the Drawer When There is no Power
I f there is no power and you need to open the drawer, follow these
instructions.
1 W ith your hands on the cash
drawer, carefully tip the
front of the register up.
U nderneath the cash
register, toward the back of
the register, you see a small
lever.
2 Push the lever in the only
direction it will move. T he
cash drawer opens.
Half System Clear
I f you cannot get the cash register to respond, try a half system clear.
To do a half system clear
1 U nplug the cash register from the power source.
2 Wait 30 seconds.
3 Plug the cash register in again.
4 C ontinue with normal operations.
1000ML User's GuideahplA011
To Next Page
