.'
't
DATEfTlME
CLOCK/MACHINE
NUMBER
The DATE is designed
~o
rollover
automatically every day and prints in the month-day-year
format
Extra
Option;.. It desired; a procedure is offered toe/iminate the date from· printing· on
~he,transaction
receipts. ·for
details see Rag 8, Option 1. on Pages
42-43.'
.
TO
PROGRAM
THE
DATE
•
"PRG"
+ (MONTH-DAY-YEAR) +
(#/ST/NS)
. 6 digit #
Example: To program January 24, 1994:
1.
Tum
the
key
to
the "PRG" (PROGRAM) position.
2.
If a
PRGjZ
Manager Password has been programmed, TYPE the (PASSWORD
#).
then PRESS
the (CHECK)
Key,
or
if
you did not program a PRGjZ Manager Password.
go
to
Step 3.
3. TYPE (012494). then PRESS the
(#
/ST/NS)
Key.
The TIME is designed
to
use
military time. REMINDER: To convert
to
military time. add the number 12 to every
. hour. Example: 1:15
P.M.
will program as (1315). Extra Option:
If
desired. a procedure is offered
to
eliminate
the time from printing on transaction receipts. for details see Rag 9. Option 1. on Pages 42-43.
TO
PROGRAM
THE
TlME
CLOCK
The time can print
in
either the
12
or
24
hour
format
The default
'Setting
is
to
print in the
12
hour mode which
is the preferred
U.S.
setting. To change.
see
Flag
22
on Page
43.
·PRG" + (HOUR, MINUTES) + (QTY/TIME)
4
digit
'"
Example:
To
program 10:15 A.M.:
1. Turn
the
key
to
the 'PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD
#).
then PRESS
the (CHECK)
Key.
or
if
you did not program a PRGjZ Manager Password. go
to
Step 3.
3. TYPE (1015). then PRESS the (QTYJTIME)
Key.
The MACHINE NUMBER is designed to assign each cash register its own identifying number. The Machine
Number prints on
all
receipts/journal records, and management reports.
TO
PROGRAM
THE
MACHINE
NUMBER
"PRG"
+ (MACHINE
#)
+ (+ok/PO)
4
digit
'"
Example: Program the cash register number
to
be 1 234:
1. Turn
the
key
to
the ·PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed. TYPE the (PASSWORD
#),
then PRESS
the (CHECK)
Key,
or
if
you did not program a PRG/Z Manager Password,
go
to
Step
3.
3. TYPE (1234). then PRESS the
(+%/PO)
Key.
Confirmation Report: The programming of the
DATE.
TIME and MACHINE NUMBER is done
in
a non-print
mode.
To
check your results, a Program Confirmation Report
is
available. For details
see Page '43.
To Next Page
Loading...
