(Continued)
X/Z
MANAGEMENT REPORTS
to
TAKE
A
(Z
or ENO-OF-DA
Y)
HJLL REPORT
\1
·X·
or·Z"
+ (AMT TEND {TOTAL)
II
1. Turn the key
to
the
"X"
or
7:
position
as
desired.
2.
If
an
·X·
or
a PRG/Z Manager Password has been programmed, "NPE the (PASSWORD
#),
then PRESS the (CHECK)
Key.
or if you did NOT program an ·X·
or
a PRG/Z Manager
Password,
go
to
Step
3.
3.
PRESS
the (AMT
lEND(TOTAL)
Key.
To issue a duplicate ·Z· Report, press the # 1ST
INS
Key and the AMT TEND {TOTAL
Key.
If other keys are
pressed atter the first "Z" Report printing, the duplicate
"Z"
Report will
not
print. To disable the duplicate
HZ"
. Report printing featyre. Rag
23
must be changed (see Page 43). •
Important: A
Full
Reading mustbecJosed out in the ·Z· position.
SEE
ILLUSTRATION OF A FULL REPORT
ON
THE NEXT PAGE.
TO
TAKE
A
(WEEKLY
or
MONTHLy)
FULL
REPORT
II
·x·
or ·Z· +
(99)
+
(AMT
TEND {TOTAL)
11
1. Turn
the
key
to
the
·X· or
·Z'
position as desired.
2.
If
an
"X·
or a PRG/Z Manager Password has been programmed, "NPE the (PASSWORD
#),
then PRESS the {CHECK}
Key,
or if you did NOT program an ·X·
or
a PRG/Z Manager
Password, go
to
Step
3.
3.
"NPE (99), then PRESS the (AMT TENDfTOTAL)
Key.
SEE
ILLUSTRATION OF A (WEEKLY
or
MONTHLy)
FULL REPORT
ON
THE NEXT PAGl::.
II
68
To Next Page
Loading...
