Royal 482NT - Example 30: Voiding a Department Preset with a Minus Percentage Discount; Example 31: Voiding a Department Preset with a Coupon Discount

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Tum the key the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary
to press the Decimal Point when ringing up a price.. .C
REMINDER: If Clerk Numbers are programmed, be sure to TYPE the (CLERK #), then PRESS
the
(CL,J:RK) Key before ringing up a sale.
I n the examples below, Department 1 is programmed
as taxable With a 6% (T PIX. 1) rate and Department 2 is
programmed for no tax and Clerk #1 is used.
EXAMPLE 30: VOIDING A DEPARTMENT PRESET PRICE WITH A MINUS PERCENTAGE DISCOUNT -
(Assume Department 1 is programmed for $1.00, Department 2 is programmed for $2.00, and
the (-%/RA) Key is pre-programmed for 10%. Ring up Department 1 and deduct
10%, ring up
Department 2 and deduct 10%, then void the Department 1 entry with the
10% discount):
1.
PRESS the (DEPARTMENT 1) Key, then PRESS the
, (-%/RA)
Key.
2.
PRESS the (DEPARTMENT 2) Key, then PRESS the
(-%/RA)
Key_
3. PRESS the (CLEAR) Key.
4. PRESS the (VOID) Key, PRESS the (DEPARTMENT 1)
Key, ,then PRESS the (-%/RA) Key. If the Minus
Percentage Discount Rate
is NOT pre-programmed,
type
in the discount rate before pressing the (-%/RA) Key.
5.
PRESS the (AMT TENDfTOTAL) Key.
,01-24:94
-1· 1234
1'00TI
10·00%6
-0·10
2 2-00
10·00%6
-0-20
VD
-1'00 TI
10-00%6
0-10
1·80
CA
001
10-50
036
EXAMPLE 31: V()IDlNG A DEPARTMENT PRESET PRICE WITH A COUPON DISCOUNT - (Assume
Department 1
is programmed for $1.00 and Department 2 is programmed for $2.00. Ring up
. Department 1,and deduct
20¢, ring up Department 2 and deduct 20¢, then void the Department
1 entry with the
20¢ coupon discount):
1. PRESS the (DEPARTMENT 1) Key.
2.
TYPE (20), then PRESS the (-) Key.
3.
PRESS the (DEPARTMENT 2) Key.
4.
TYPE (20), then PRESS the (-) Key.
5. PRESS the (CLEAR) Key.
6. PRESS the (VOIDt Key, then PRESS the
(DEPARTMENT 1) Key.
7.
TYPE (20), PRESS the (VOID) Key,
then PRESS the (-) Key.
8. PRESS the (AMT TENDfTOTAL) Key.
' 01-24-94
·1·
1234
1
1-00
TI
-0-20 6
2 2-00
-0-20 6
VD
1
-1-00
TI
VD
0-20 6
1·80
CA
001
10·51 037