100 Cubis MSA User Manual
Formulation
t Once you fix the components, now define now the unit:
#OQWPVKPYGKIJVWPKV(Formulation 1)
&GHCWNVKPRGTEGPVCIGUWO(Formulations 2 and 3)
&GHCWNVKPRGTEGPVCIGUWO (Formulations 4 and 5)
t Touch
0GZV.
t Enter the number of components.
y An overview of all settings is displayed (here, Formulation 2 as an example).
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Prompts for configuring weighing and printing appear.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
Execute Task: Formulation
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, press 5VCTV.
t If required, enter the number of components that you want to weigh while
adding them.
t To start the formulation, touch 5VCTV.
t If required, enter the name of components.
Please note that you will be able to scroll through the lines as soon as a scroll bar
appears at the right of the display.
To Next Page
Loading...
Need help?
General