Sartorius MSA3.6P - Configure Task: Parts Counting

Cubis MSA User Manual 113
Parts Counting
Parts Counting
Purpose: This application is used to determine the number of objects which each have
approximately equal weight. This saves you from having to count
individual parts.
Options: You can calculate or enter the piece weight of individual objects.
Combination options: Checkweighing, timer-controlled functions, totalizing, statistics, formulation, mass
unit conversion, second tare memory, individual identifiers, (SQmin function, DKD
measurement uncertainty)
Configure Task: Parts Counting
D
t Select the method that you want to use.
9KVJECNEWNCVKQPQHRKGEGYGKIJVThe piece weight is determined by
weighing a known reference piece quantity.
5RGEKHKECVKQPQHRKGEGYGKIJV The piece weight is entered as a numerical
value.
With calculation of the piece weight:
t Define how the reference piece count should be entered.
'PVGTHKZGFTGHGTGPEGRKGEGEQWPV: You must enter this reference piece
countP4GH now.
4GHGTGPEGRKGEGEQWPVECPDGEJCPIGFFWTKPIVJGRTQEGUU:
The reference piece count is entered when the task is executed.
When entering the piece count:
t Define how the piece weight should be entered.
'PVGTHKZGFRKGEGYGKIJV: You must enter this piece weightY4GH now.
2KGEGYGKIJVECPDGEJCPIGFFWTKPIRTQEGUU: The piece weight is
entered when the task is carried out.