30 Cubis MSA User Manual
Using the Balance
The System Settings (Menu) contains all basic settings and parameters used to
operate the balance that affect the entire balance operation. They can also be used
for creating new tasks.
The Wizard
You can choose between two display types in several menus:
The overview lists all parameters with their set options. You can select each individual
option to change its setting.
When you activate the Wizard in the same menu, the program guides you step-by-
step: The individual parameters with their options are displayed in succession.
Using the Display and Control Unit
Control keys:
D
TASK key: Opens Task Management in which applications can be selected and tasks
defined. While working in this menu, you can also use the TASK key to cancel at
any time and return to task overview.
H
USER key: Opens User Management in which users can be selected and user set-
tings can be made. While working in this menu, you can also use the USER key to
cancel at any time and return to user overview.
J
Left and right TARE keys: used to tare the balance.
P
PRINT key: used to print the currently displayed measurement results
or a user-specific print out.
A
On/Off key: Used to switch on/off and to standby.
O
Operating elements for electronic draft shield (optional)
To Next Page
Loading...
Need help?
General