Cubis MSA User Manual 111
Second Tare Memory (Preset Tare)
Second Tare Memory (Preset Tare)
Purpose: This application is used to define the second tare value. As soon as a second tare
value is used, 0GVappears on the display for the respective net value.
Options: You can either use a weight value or enter a numerical value as a second tare value.
Combination options: Mass unit conversion, individual identifiers, (SQmin function, DKD measurement
uncertainty)
Configure Task: Second Tare Memory
D
y No pre-settings are required for this application.
y Now you will be to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
Execute Task: Second Tare Memory (Preset Tare)
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, touch 5VCTV.
t You have two options for defining the second tare.
Setting a Weight Value as Second Tare
t Place the object (container) on the balance whose weight value you want to
use as the second tare.
t Touch
6
To Next Page
Loading...
Need help?
General