Sartorius MSA3.6P - DKD Measurement Uncertainty; Execute Task: DKD Measurement Uncertainty

110 Cubis MSA User Manual
DKD Measurement Uncertainty
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch
Save.
Execute Task: DKD Measurement Uncertainty
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, press 5VCTV.
y If you have selected #DUQNWVGWPEGTVCKPV[, the uncertainty of the weight
value is displayed in a tab (e. g. U 12.01 g). This value is based on the DKD
value set by a service technician.
y If you have selected TGNCVKXGWPEGTVCKPV[ the relative uncertainty of the
measurement is displayed in a tab as a percentage of the weight value.
y If you have selected RTQEGUUCEEWTCE[, the process accuracy is displayed in
a tab in percent.