Cubis MSA User Manual 189
Accessories
Accessories
Cubis
®
Optional Accessories
Printers and Communication
Verifiable data printer for connection to RS-232, 25-pin accessory interface YDP10-0CE
Verifiable data printer with
Bluetooth
®
data transmission (with YDO01MS-B or IB option only) YDP10BT-0CE
Color ribbon for YDP10-0CE and YDP10BT-OCE 6906918
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each 6906937
Bluetooth
®
data interface for wireless connection of data printer YDP10BT YDO01MS-B
RS232C data interface, 9-pin including PS/2 for connecting a PC or keyboard YDO01MS-P
RS232C data interface, 25-pin for connection of Cubis
®
accessories YDO01MS-R
Display cable 3 m for Cubis
®
MSA and MSU models, for separate setup of display and weighing unit
(Installation by Sartorius Service or in factory [order VF4016])
YCC01-MSD3
Cable 3 m between weighing module and electronics module for Cubis
®
models
with 0.01 mg | 0.001 mg | 0.0001 mg readability
YCC01-MSM3
Installation display cable 3 m for Cubis
®
models, for separate setup of display and weighing unit VF4016
RS232C connection cable to connect PC with 9-pin COM interface, length 1.5 m 7357314
SartoCollect software for data communication between balance and PC YSC02
Sartorius OPC Server for connecting all Sartorius Cubis
®
balances
Requires 32-bit Microsoft Windows 2000 or XP with current service packs.
(free download of a 30-day trial version from the Sartorius website)
– Initial license
– Each additional license within an order
6289OPC
6289OPC-L
Displays and Input | Output Elements
MSA control unit with color TFT graphic display and touch screen YAC01MSA
MSE display unit with backlit LC display and tactile keys YAC01MSE
MSU control unit with backlit b | w graphic display and tactile navigation keys YAC01MSU
Barcode reader with connection cable, 120 mm reading range YBR03PS2
Foot switch for printing, taring, or using function keys, selection via menu, incl. T connector YFS01
Infrared sensor for touch-free activation of functions (e.g., draft shield control) YHS01MS
Hand switch for printing, taring, or using function keys, selection via menu, incl. T connector YHS02
Foot switch for the draft shield OPEN | CLOSED functions (only in combination with DA and DI draft shield),
taring and printing
YPE01RC
Additional display, LCD, figure size 13 mm, backlit YRD03Z
3-segment control display, red – green – red, for plus | minus measurements, incl. T connector YRD11Z
To Next Page
Loading...
Need help?
General