Cubis MSA User Manual 161
Care and Maintenance
Care and Maintenance
Service
Regular servicing by a Sartorius technician will extend the service life of your balance
and ensure its continued weighing accuracy. Sartorius offers its customers service
contracts with regular maintenance intervals ranging from 1 month to 2 years.
The frequency of the maintenance intervals depends on the operating conditions
and user’s tolerance requirements.
Repairs
Repair work must only be performed by trained service technicians. Repairs
performed by untrained persons may result in considerable hazards for the user.
The device should be unplugged during repair work.
3 Unplug the power cord from the outlet.
Repair work must only be performed by Sartorius-trained service technicians.
As needed: Please contact your Sartorius dealer!
Cleaning the Balance
Ensure that no dust or liquid enters the balance weighing system.
3
Do not use aggressive cleaning agents (solvents or similar agents).
Isolate from supply voltage: Unplug the power cord from the wall outlet and
unplug any data cables connected to the balance.
t Open the panels of the analytical draft shield completely.
t Clean the housing and interior of the balance with a cloth lightly moistened
with a soap solution.
t Dry all parts with a soft, dry cloth or use blotting paper to absorb dampness.
Then replace all dried parts.
t Remove panels from the analytical draft shield and clean them with
commercially available glass cleaner. Dry the panels and then reinstall them
in the balance.
To Next Page
Loading...