Cubis MSA User Manual 7
General View of the Equipment and Equipment Supplied
General View of the Equipment
and Equipment Supplied
Balances with a readability of * 0,01 mg
Pos. Description
1 Upper sliding draft shield panel/Handle
2 Back panel
3 Weighing pan
4 Pan support (not for MSx225.../MSx125... models)
5 Shield plate
6 Pan retainer
7 Right sliding panel/Handle
8 SD card slot (for MSU, MSA models)
9 Leveling foot
10 Display
11 Display and control unit
12 Draft shield/Shield disk (only for models with a readability of 1
mg and 10 mg)
13 Below-cell weighing port
(on the bottom of the balance)
14 Leveling foot
15 Level indicator
16 Power socket
17 Slot for attaching an anti-theft device
18 USB socket for a PC connection
19 Below-cell weighing hook
20 Slot for optional interfaces,
e.g., 9-pin data output and PS2 (as shown) or Bluetooth
21 Communication port (PERIPHERALS) for accessories
22 Menu access switch
23 Left sliding panel/handle
24 Ethernet Interface
(on the bottom of the display and control unit)
25 Semi-microbalances: Female connector for weigh cell
26 Semi-microbalances: Electronics module
(for MSx225.../MSx125... models)
Not shown:
– AC adapter
– USB cable
– Operating instructions
10
11
23
3
4
5
5
6
6
13
13
11
11
14
14
6
12
12
4
3
3
15
16
17
18
19
20
21
22
4
25
26
15
17
20
21
22
1
2
3
4
5
6
7
9
8
24
To Next Page
Loading...
Need help?
General