108 Cubis MSA User Manual
Totalizing
t Define when the number of measurements (items) will be defined.
'PVGTHKZGFSWCPVKV[ The quantity of items is defined beforehand.
6JGSWCPVKV[ECPDGEJCPIGFFWTKPIVJGRTQEGUU
Enter the quantity of items when you execute the task.
t Define whether or not automatic taring should take place after storing the
value.
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
Execute Task: Totalizing
D t If you haven’t already done so, go to Task Management.
y The task selection is displayed.
t Touch the desired task
or
t If the desired task is already selected, press Start.
t If required, enter the number of items that you want to add up.
t Place the first sample on the weighing pan.
t To start Totalizing, touch Start.
t During the task, you can show the results of previous measurements at any
time by touching %CNE
To Next Page
Loading...
Need help?
General