Sartorius MSA3.6P User Manual

158 Cubis MSA User Manual
Updating the Software
3) Upload the software update to the balance:
t If you are working with User Management, it is necessary to log on as adminis-
trator.
t Toggle to the System Settings menu.
t Open the 7RFCVGUQHVYCTG submenu.
y You are asked if you want to delete the existing profiles.
t Touch No or Yes.
t Once the SD card with the current software is inserted, touch 0GZV.
If the following error message appears:
9TQPI:/.XGTUKQP2NGCUGEJGEMVJGFCVC
t Touch Next.
y All previous data will be saved in the new format.
t After updating your software, check your settings (Menu, TASK and USER).
t If the XML files continue to cause problems, contact your local Sartorius service
center.
y After a version check is run, the versions of the current and the new software
are displayed.
t To start the update, press %QPVKPWG.
y An acoustical signal will sound when the update is complete and the balance
then carries out a self test.
Audit Trail for Software Download on Models Verified for Legal
Metrology
Software Status of the Balance
Models verified for use in legal metrology are assigned an authorized software sta-
tus when the balance is shipped for delivery. This can be indicated in the display.
If something concerning the software or the legal regulations changes, the software
status must be updated.
Display Audit Trail of the Balance Software
t Turn off the balance and disconnect it from the power supply.
t Keep A pressed and reconnect the balance back to the power supply.
y The “Bios” menu is displayed.
t Press the “Settings” menu item.
t Select the “Audit trail of software updates” menu item.
t Select “Show audit trail.”
y The Audit Trail with modification date, name, new and old software and
version number are indicated in the display.

Sartorius MSA3.6P Specifications

General

Brand	Sartorius
Model	MSA3.6P
Category	Scales
Language	English