180 Cubis MSA User Manual
Specifications
Model-specific Data
Verified models with EC Type Approval Certificate: Precision balances
Models MSA623S-0CE MSA623P-0CE MSA323S-0CE
Accuracy class* K K K
For verified models: EG-Type-Approval Certificate D09-09-015, Type: MSX
Scale interval d* mg 1 1/2/5 1
Weighing capacity max* g 620 150/300/620 320
Calibration value e* mg 10 10 10
Min. load min* mg 20 20 20
Tare equalization range (subtractive) 100% from max. weighing capacity
Application range according to DIR* g 0.02 – 620 0.02 – 620 0.02 – 320
Min. initial weight** g 1.5 1.5 1.5
Typical stabilization time s 0.8 0.8 0.8
Typical measurement time s 1 1 1
Application range (temperature) With “isoCAL” function: +5 to +40 °C | Without “isoCAL” function: +10 to +30 °C
Display result
(depending on the set filter level) 0.1 – 0.4
Weighing pan size (W D) mm 140 140
Weighing chamber height (draft shield DE)
) mm 172
Protection Protected against dust and water
Models MSA14202S- MSA14202P- MSA10202S- MSA8202S-
0CE 0CE 0CE 0CE
Accuracy class* k k K K
For verified models: EC Type-Approval Certificate D09-09-015, Type: MSX
Scale interval d* g 0.01 0.01/0.02/0.05 0.01 0.01
Weighing capacity max* g 14,200 3500/7000/ 10,200 8200
14,200
Calibration value e* g 0.1 0.1 0.1 0.1
Min. load min* g 1 1 1 0.5
Tare equalization range (subtractive) 100% from max. weighing capacity
Application range according to DIR* g 1 – 14,200 1 – 14,200 1 – 10,200 0.5 – 8200
Min. initial weight** g 15 15 12 12
Typical stabilization time s 1 1 1 1
Typical measurement time s 1.5 1.5 1.5 1.5
Application range (temperature):
With “isoCAL” function +5 to +40 °C +5 to +40 °C +5 to +40 °C +5 to +40 °C
Without “isoCAL” function +15 to +25 °C +15 to +25 °C +15 to +25 °C +10 to +30 °C
Display result
(depending on the set filter level) 0.1 – 0.4
Weighing pan size (W D) mm 206 206
Protection Protected against dust and water
* DIR = Directive 90/384/EEC on non-automatic weighing instruments used within the European Economic Area
** = Typical min. initial weighing according to USP (Unites States Pharmacopeia), USP31-NF26
To Next Page
Loading...
Need help?
General