Cubis MSA User Manual 79
Density Determination
Configure Task: Determining the Density of a Solid
You can choose from two methods to determine the density of a solid: Buoyancy
or displacement.
D
t Select the method that you want to use: Buoyancy or displacement.
t Select the density kit you want to use.
5CTVQTKWUFGPUKV[MKV;&- For measuring with the YDK kit
#FKHHGTGPVFGPUKV[FGVGTOKPCVKQPMKV: If you want to use another kit
0QFGPUKV[MKV: If you do not want to use any kit.
t Select or enter the prompted values (for explanations see Features on page 78).
Additional prompts/settings for another determination kit
*= Factory setting
Parameters for the density kit
Name: Enter a name
No. of wires: Enter the number of wires for the density kit that are immersed into the liquid.
Wire diameter: Enter wire diameter (in mm)
Vessel diameter: Enter vessel diameter (in mm)
Configure Task: Determining Density Using a Pycnometer
D
t Select the 2[EPQOGVGT method.
t Select or enter the prompted values (for explanations see Features on page 78).
To Next Page
Loading...
Need help?
General