Cubis MSA User Manual 81
Density Determination
t Check all settings in the overview and change individual parameters as required.
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
Execute Task: Density Determination
t Prepare the density determination kit that you want to use
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, press 5VCTV.
y The program switches to operating mode.
t Follow the instructions on the display.
To Next Page
Loading...