Sartorius MSA3.6P - Execute Task: Statistics

84 Cubis MSA User Manual
Statistics
t Define when the number of measurements (items) will be defined.
'PVGTHKZGFPWODGT The item number is defined beforehand.
0WODGTECPDGEJCPIGF Enter the item number when you execute the task.
t Define whether or not automatic taring takes place after the transfer.
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
y The new task is saved with your settings and displayed in the task list.
Execute Task: Statistics
D t If you haven’t already done so, go to Task Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, press 5VCTV.
y The program switches to operating mode
t If required, enter the number of items that you want to analyze.
t Place the first sample on the weighing pan.
t To start Statistics, touch Start.
y The first weight value is displayed.